RHST=Others, EXICEN=0, VBUSEN=0, RWUPE=0, USBRST=0, WKUP=0, RESUME=0, UACT=0
Device State Control Register 0
| RHST | USB Bus Reset Status Flag 0 (000): Communication speed indeterminate (powered state or no connection) 0 (Others): Host controller mode USB bus reset in progress Device controller mode Setting prohibited 1 (001): Host controller mode Low-speed connection Device controller mode USB bus reset in progress or low-speed connection 2 (010): Host controller mode Full-speed connection Device controller mode USB bus reset in progress or full-speed connection 3 (011): Host controller mode High-speed connection Device controller mode USB bus reset in progress or high-speed connection |
| UACT | USB Bus Operation Enable for the Host Controller Operation 0 (0): Disable downstream port (disable SOF or micro-SOF transmission) 1 (1): Enable downstream port (enable SOF or micro-SOF transmission) |
| RESUME | Resume Signal Output for the Host Controller Operation 0 (0): Do not output resume signal 1 (1): Output resume signal |
| USBRST | USB Bus Reset Output for the Host Controller Operation 0 (0): Do not output USB bus reset signal 1 (1): Output USB bus reset signal |
| RWUPE | Remote Wakeup Detection Enable for the Host Controller Operation 0 (0): Disable downstream port remote wakeup 1 (1): Enable downstream port remote wakeup |
| WKUP | Remote Wakeup Output for the Device Controller Operation 0 (0): Do not output remote wakeup signal 1 (1): Output remote wakeup signal |
| VBUSEN | USBHS_VBUSEN Output Pin Control 0 (0): Output low on external USBHS_VBUSEN pin 1 (1): Output high on external USBHS_VBUSEN pin |
| EXICEN | USBHS_EXICEN Output Pin Control 0 (0): Output low on external USBHS_EXICEN pin 1 (1): Output high on external USBHS_EXICEN pin |
| HNPBTOA | Host Negotiation Protocol (HNP) Control |